v6 Opcodes

Ops have a 'cost' of 1 unless otherwise specified.

err¶

Bytecode: 0x00
Stack: ... → exits
Fail immediately.

sha256¶

Bytecode: 0x01
Stack: ..., A: []byte → ..., [32]byte
SHA256 hash of value A, yields [32]byte
Cost: 35

keccak256¶

Bytecode: 0x02
Stack: ..., A: []byte → ..., [32]byte
Keccak256 hash of value A, yields [32]byte
Cost: 130

sha512_256¶

Bytecode: 0x03
Stack: ..., A: []byte → ..., [32]byte
SHA512_256 hash of value A, yields [32]byte
Cost: 45

ed25519verify¶

Bytecode: 0x04
Stack: ..., A: []byte, B: [64]byte, C: [32]byte → ..., bool
for (data A, signature B, pubkey C) verify the signature of ("ProgData" || program_hash || data) against the pubkey => {0 or 1}
Cost: 1900

The 32 byte public key is the last element on the stack, preceded by the 64 byte signature at the second-to-last element on the stack, preceded by the data which was signed at the third-to-last element on the stack.

ecdsa_verify¶

Syntax: ecdsa_verify V where V: ECDSA
Bytecode: 0x05 {uint8}
Stack: ..., A: [32]byte, B: [32]byte, C: [32]byte, D: [32]byte, E: [32]byte → ..., bool
for (data A, signature B, C and pubkey D, E) verify the signature of the data against the pubkey => {0 or 1}
Cost: Secp256k1=1700
Availability: v5

ECDSA¶

Curves

Index	Name	Notes
0	Secp256k1	secp256k1 curve, used in Bitcoin

The 32 byte Y-component of a public key is the last element on the stack, preceded by X-component of a pubkey, preceded by S and R components of a signature, preceded by the data that is fifth element on the stack. All values are big-endian encoded. The signed data must be 32 bytes long, and signatures in lower-S form are only accepted.

ecdsa_pk_decompress¶

Syntax: ecdsa_pk_decompress V where V: ECDSA
Bytecode: 0x06 {uint8}
Stack: ..., A: [33]byte → ..., X: [32]byte, Y: [32]byte
decompress pubkey A into components X, Y
Cost: Secp256k1=650
Availability: v5

The 33 byte public key in a compressed form to be decompressed into X and Y (top) components. All values are big-endian encoded.

ecdsa_pk_recover¶

Syntax: ecdsa_pk_recover V where V: ECDSA
Bytecode: 0x07 {uint8}
Stack: ..., A: [32]byte, B: uint64, C: [32]byte, D: [32]byte → ..., X: [32]byte, Y: [32]byte
for (data A, recovery id B, signature C, D) recover a public key
Cost: 2000
Availability: v5

S (top) and R elements of a signature, recovery id and data (bottom) are expected on the stack and used to deriver a public key. All values are big-endian encoded. The signed data must be 32 bytes long.

+¶

Bytecode: 0x08
Stack: ..., A: uint64, B: uint64 → ..., uint64
A plus B. Fail on overflow.

Overflow is an error condition which halts execution and fails the transaction. Full precision is available from addw.

-¶

Bytecode: 0x09
Stack: ..., A: uint64, B: uint64 → ..., uint64
A minus B. Fail if B > A.

/¶

Bytecode: 0x0a
Stack: ..., A: uint64, B: uint64 → ..., uint64
A divided by B (truncated division). Fail if B == 0.

divmodw is available to divide the two-element values produced by mulw and addw.

*¶

Bytecode: 0x0b
Stack: ..., A: uint64, B: uint64 → ..., uint64
A times B. Fail on overflow.

Overflow is an error condition which halts execution and fails the transaction. Full precision is available from mulw.

<¶

Bytecode: 0x0c
Stack: ..., A: uint64, B: uint64 → ..., bool
A less than B => {0 or 1}

>¶

Bytecode: 0x0d
Stack: ..., A: uint64, B: uint64 → ..., bool
A greater than B => {0 or 1}

<=¶

Bytecode: 0x0e
Stack: ..., A: uint64, B: uint64 → ..., bool
A less than or equal to B => {0 or 1}

>=¶

Bytecode: 0x0f
Stack: ..., A: uint64, B: uint64 → ..., bool
A greater than or equal to B => {0 or 1}

&&¶

Bytecode: 0x10
Stack: ..., A: uint64, B: uint64 → ..., bool
A is not zero and B is not zero => {0 or 1}

||¶

Bytecode: 0x11
Stack: ..., A: uint64, B: uint64 → ..., bool
A is not zero or B is not zero => {0 or 1}

==¶

Bytecode: 0x12
Stack: ..., A, B → ..., bool
A is equal to B => {0 or 1}

!=¶

Bytecode: 0x13
Stack: ..., A, B → ..., bool
A is not equal to B => {0 or 1}

!¶

Bytecode: 0x14
Stack: ..., A: uint64 → ..., uint64
A == 0 yields 1; else 0

len¶

Bytecode: 0x15
Stack: ..., A: []byte → ..., uint64
yields length of byte value A

itob¶

Bytecode: 0x16
Stack: ..., A: uint64 → ..., [8]byte
converts uint64 A to big-endian byte array, always of length 8

btoi¶

Bytecode: 0x17
Stack: ..., A: []byte → ..., uint64
converts big-endian byte array A to uint64. Fails if len(A) > 8. Padded by leading 0s if len(A) < 8.

btoi fails if the input is longer than 8 bytes.

%¶

Bytecode: 0x18
Stack: ..., A: uint64, B: uint64 → ..., uint64
A modulo B. Fail if B == 0.

|¶

Bytecode: 0x19
Stack: ..., A: uint64, B: uint64 → ..., uint64
A bitwise-or B

&¶

Bytecode: 0x1a
Stack: ..., A: uint64, B: uint64 → ..., uint64
A bitwise-and B

^¶

Bytecode: 0x1b
Stack: ..., A: uint64, B: uint64 → ..., uint64
A bitwise-xor B

~¶

Bytecode: 0x1c
Stack: ..., A: uint64 → ..., uint64
bitwise invert value A

mulw¶

Bytecode: 0x1d
Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
A times B as a 128-bit result in two uint64s. X is the high 64 bits, Y is the low

addw¶

Bytecode: 0x1e
Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
A plus B as a 128-bit result. X is the carry-bit, Y is the low-order 64 bits.
Availability: v2

divmodw¶

Bytecode: 0x1f
Stack: ..., A: uint64, B: uint64, C: uint64, D: uint64 → ..., W: uint64, X: uint64, Y: uint64, Z: uint64
W,X = (A,B / C,D); Y,Z = (A,B modulo C,D)
Cost: 20
Availability: v4

The notation J,K indicates that two uint64 values J and K are interpreted as a uint128 value, with J as the high uint64 and K the low.

intcblock¶

Syntax: intcblock UINT ... where UINT ...: a block of int constant values
Bytecode: 0x20 {varuint count, [varuint ...]}
Stack: ... → ...
prepare block of uint64 constants for use by intc

intcblock loads following program bytes into an array of integer constants in the evaluator. These integer constants can be referred to by intc and intc_* which will push the value onto the stack. Subsequent calls to intcblock reset and replace the integer constants available to the script.

intc¶

Syntax: intc I where I: an index in the intcblock
Bytecode: 0x21 {uint8}
Stack: ... → ..., uint64
Ith constant from intcblock

intc_0¶

Bytecode: 0x22
Stack: ... → ..., uint64
constant 0 from intcblock

intc_1¶

Bytecode: 0x23
Stack: ... → ..., uint64
constant 1 from intcblock

intc_2¶

Bytecode: 0x24
Stack: ... → ..., uint64
constant 2 from intcblock

intc_3¶

Bytecode: 0x25
Stack: ... → ..., uint64
constant 3 from intcblock

bytecblock¶

Syntax: bytecblock BYTES ... where BYTES ...: a block of byte constant values
Bytecode: 0x26 {varuint count, [varuint length, bytes ...]}
Stack: ... → ...
prepare block of byte-array constants for use by bytec

bytecblock loads the following program bytes into an array of byte-array constants in the evaluator. These constants can be referred to by bytec and bytec_* which will push the value onto the stack. Subsequent calls to bytecblock reset and replace the bytes constants available to the script.

bytec¶

Syntax: bytec I where I: an index in the bytecblock
Bytecode: 0x27 {uint8}
Stack: ... → ..., []byte
Ith constant from bytecblock

bytec_0¶

Bytecode: 0x28
Stack: ... → ..., []byte
constant 0 from bytecblock

bytec_1¶

Bytecode: 0x29
Stack: ... → ..., []byte
constant 1 from bytecblock

bytec_2¶

Bytecode: 0x2a
Stack: ... → ..., []byte
constant 2 from bytecblock

bytec_3¶

Bytecode: 0x2b
Stack: ... → ..., []byte
constant 3 from bytecblock

arg¶

Syntax: arg N where N: an arg index
Bytecode: 0x2c {uint8}
Stack: ... → ..., []byte
Nth LogicSig argument
Mode: Signature

arg_0¶

Bytecode: 0x2d
Stack: ... → ..., []byte
LogicSig argument 0
Mode: Signature

arg_1¶

Bytecode: 0x2e
Stack: ... → ..., []byte
LogicSig argument 1
Mode: Signature

arg_2¶

Bytecode: 0x2f
Stack: ... → ..., []byte
LogicSig argument 2
Mode: Signature

arg_3¶

Bytecode: 0x30
Stack: ... → ..., []byte
LogicSig argument 3
Mode: Signature

txn¶

Syntax: txn F where F: txn
Bytecode: 0x31 {uint8}
Stack: ... → ..., any
field F of current transaction

txn¶

Fields (see transaction reference)

Index	Name	Type	In	Notes
0	Sender	address		32 byte address
1	Fee	uint64		microalgos
2	FirstValid	uint64		round number
4	LastValid	uint64		round number
5	Note	[]byte		Any data up to 1024 bytes
6	Lease	[32]byte		32 byte lease value
7	Receiver	address		32 byte address
8	Amount	uint64		microalgos
9	CloseRemainderTo	address		32 byte address
10	VotePK	[32]byte		32 byte address
11	SelectionPK	[32]byte		32 byte address
12	VoteFirst	uint64		The first round that the participation key is valid.
13	VoteLast	uint64		The last round that the participation key is valid.
14	VoteKeyDilution	uint64		Dilution for the 2-level participation key
15	Type	[]byte		Transaction type as bytes
16	TypeEnum	uint64		Transaction type as integer
17	XferAsset	uint64		Asset ID
18	AssetAmount	uint64		value in Asset's units
19	AssetSender	address		32 byte address. Source of assets if Sender is the Asset's Clawback address.
20	AssetReceiver	address		32 byte address
21	AssetCloseTo	address		32 byte address
22	GroupIndex	uint64		Position of this transaction within an atomic transaction group. A stand-alone transaction is implicitly element 0 in a group of 1
23	TxID	[32]byte		The computed ID for this transaction. 32 bytes.
24	ApplicationID	uint64	v2	ApplicationID from ApplicationCall transaction
25	OnCompletion	uint64	v2	ApplicationCall transaction on completion action
27	NumAppArgs	uint64	v2	Number of ApplicationArgs
29	NumAccounts	uint64	v2	Number of Accounts
30	ApprovalProgram	[]byte	v2	Approval program
31	ClearStateProgram	[]byte	v2	Clear state program
32	RekeyTo	address	v2	32 byte Sender's new AuthAddr
33	ConfigAsset	uint64	v2	Asset ID in asset config transaction
34	ConfigAssetTotal	uint64	v2	Total number of units of this asset created
35	ConfigAssetDecimals	uint64	v2	Number of digits to display after the decimal place when displaying the asset
36	ConfigAssetDefaultFrozen	bool	v2	Whether the asset's slots are frozen by default or not, 0 or 1
37	ConfigAssetUnitName	[]byte	v2	Unit name of the asset
38	ConfigAssetName	[]byte	v2	The asset name
39	ConfigAssetURL	[]byte	v2	URL
40	ConfigAssetMetadataHash	[32]byte	v2	32 byte commitment to unspecified asset metadata
41	ConfigAssetManager	address	v2	32 byte address
42	ConfigAssetReserve	address	v2	32 byte address
43	ConfigAssetFreeze	address	v2	32 byte address
44	ConfigAssetClawback	address	v2	32 byte address
45	FreezeAsset	uint64	v2	Asset ID being frozen or un-frozen
46	FreezeAssetAccount	address	v2	32 byte address of the account whose asset slot is being frozen or un-frozen
47	FreezeAssetFrozen	bool	v2	The new frozen value, 0 or 1
49	NumAssets	uint64	v3	Number of Assets
51	NumApplications	uint64	v3	Number of Applications
52	GlobalNumUint	uint64	v3	Number of global state integers in ApplicationCall
53	GlobalNumByteSlice	uint64	v3	Number of global state byteslices in ApplicationCall
54	LocalNumUint	uint64	v3	Number of local state integers in ApplicationCall
55	LocalNumByteSlice	uint64	v3	Number of local state byteslices in ApplicationCall
56	ExtraProgramPages	uint64	v4	Number of additional pages for each of the application's approval and clear state programs. An ExtraProgramPages of 1 means 2048 more total bytes, or 1024 for each program.
57	Nonparticipation	bool	v5	Marks an account nonparticipating for rewards
59	NumLogs	uint64	v5	Number of Logs (only with `itxn` in v5). Application mode only
60	CreatedAssetID	uint64	v5	Asset ID allocated by the creation of an ASA (only with `itxn` in v5). Application mode only
61	CreatedApplicationID	uint64	v5	ApplicationID allocated by the creation of an application (only with `itxn` in v5). Application mode only
62	LastLog	[]byte	v6	The last message emitted. Empty bytes if none were emitted. Application mode only
63	StateProofPK	[]byte	v6	64 byte state proof public key

global¶

Syntax: global F where F: global
Bytecode: 0x32 {uint8}
Stack: ... → ..., any
global field F

global¶

Fields

Index	Name	Type	In	Notes
0	MinTxnFee	uint64		microalgos
1	MinBalance	uint64		microalgos
2	MaxTxnLife	uint64		rounds
3	ZeroAddress	address		32 byte address of all zero bytes
4	GroupSize	uint64		Number of transactions in this atomic transaction group. At least 1
5	LogicSigVersion	uint64	v2	Maximum supported version
6	Round	uint64	v2	Current round number. Application mode only.
7	LatestTimestamp	uint64	v2	Last confirmed block UNIX timestamp. Fails if negative. Application mode only.
8	CurrentApplicationID	uint64	v2	ID of current application executing. Application mode only.
9	CreatorAddress	address	v3	Address of the creator of the current application. Application mode only.
10	CurrentApplicationAddress	address	v5	Address that the current application controls. Application mode only.
11	GroupID	[32]byte	v5	ID of the transaction group. 32 zero bytes if the transaction is not part of a group.
12	OpcodeBudget	uint64	v6	The remaining cost that can be spent by opcodes in this program.
13	CallerApplicationID	uint64	v6	The application ID of the application that called this application. 0 if this application is at the top-level. Application mode only.
14	CallerApplicationAddress	address	v6	The application address of the application that called this application. ZeroAddress if this application is at the top-level. Application mode only.

gtxn¶

Syntax: gtxn T F where T: transaction group index, F: txn
Bytecode: 0x33 {uint8}, {uint8}
Stack: ... → ..., any
field F of the Tth transaction in the current group

for notes on transaction fields available, see txn. If this transaction is i in the group, gtxn i field is equivalent to txn field.

load¶

Syntax: load I where I: position in scratch space to load from
Bytecode: 0x34 {uint8}
Stack: ... → ..., any
Ith scratch space value. All scratch spaces are 0 at program start.

store¶

Syntax: store I where I: position in scratch space to store to
Bytecode: 0x35 {uint8}
Stack: ..., A → ...
store A to the Ith scratch space

txna¶

Syntax: txna F I where F: txna, I: transaction field array index
Bytecode: 0x36 {uint8}, {uint8}
Stack: ... → ..., any
Ith value of the array field F of the current transaction
txna can be called using txn with 2 immediates.
Availability: v2

txna¶

Fields (see transaction reference)

Index	Name	Type	In	Notes
26	ApplicationArgs	[]byte	v2	Arguments passed to the application in the ApplicationCall transaction
28	Accounts	address	v2	Accounts listed in the ApplicationCall transaction
48	Assets	uint64	v3	Foreign Assets listed in the ApplicationCall transaction
50	Applications	uint64	v3	Foreign Apps listed in the ApplicationCall transaction
58	Logs	[]byte	v5	Log messages emitted by an application call (only with `itxn` in v5). Application mode only

gtxna¶

Syntax: gtxna T F I where T: transaction group index, F: txna, I: transaction field array index
Bytecode: 0x37 {uint8}, {uint8}, {uint8}
Stack: ... → ..., any
Ith value of the array field F from the Tth transaction in the current group
gtxna can be called using gtxn with 3 immediates.
Availability: v2

gtxns¶

Syntax: gtxns F where F: txn
Bytecode: 0x38 {uint8}
Stack: ..., A: uint64 → ..., any
field F of the Ath transaction in the current group
Availability: v3

for notes on transaction fields available, see txn. If top of stack is i, gtxns field is equivalent to gtxn _i_ field. gtxns exists so that i can be calculated, often based on the index of the current transaction.

gtxnsa¶

Syntax: gtxnsa F I where F: txna, I: transaction field array index
Bytecode: 0x39 {uint8}, {uint8}
Stack: ..., A: uint64 → ..., any
Ith value of the array field F from the Ath transaction in the current group
gtxnsa can be called using gtxns with 2 immediates.
Availability: v3

gload¶

Syntax: gload T I where T: transaction group index, I: position in scratch space to load from
Bytecode: 0x3a {uint8}, {uint8}
Stack: ... → ..., any
Ith scratch space value of the Tth transaction in the current group
Availability: v4
Mode: Application

gload fails unless the requested transaction is an ApplicationCall and T < GroupIndex.

gloads¶

Syntax: gloads I where I: position in scratch space to load from
Bytecode: 0x3b {uint8}
Stack: ..., A: uint64 → ..., any
Ith scratch space value of the Ath transaction in the current group
Availability: v4
Mode: Application

gloads fails unless the requested transaction is an ApplicationCall and A < GroupIndex.

gaid¶

Syntax: gaid T where T: transaction group index
Bytecode: 0x3c {uint8}
Stack: ... → ..., uint64
ID of the asset or application created in the Tth transaction of the current group
Availability: v4
Mode: Application

gaid fails unless the requested transaction created an asset or application and T < GroupIndex.

gaids¶

Bytecode: 0x3d
Stack: ..., A: uint64 → ..., uint64
ID of the asset or application created in the Ath transaction of the current group
Availability: v4
Mode: Application

gaids fails unless the requested transaction created an asset or application and A < GroupIndex.

loads¶

Bytecode: 0x3e
Stack: ..., A: uint64 → ..., any
Ath scratch space value. All scratch spaces are 0 at program start.
Availability: v5

stores¶

Bytecode: 0x3f
Stack: ..., A: uint64, B → ...
store B to the Ath scratch space
Availability: v5

bnz¶

Syntax: bnz TARGET where TARGET: branch offset
Bytecode: 0x40 {int16 (big-endian)}
Stack: ..., A: uint64 → ...
branch to TARGET if value A is not zero

The bnz instruction opcode 0x40 is followed by two immediate data bytes which are a high byte first and low byte second which together form a 16 bit offset which the instruction may branch to. For a bnz instruction at pc, if the last element of the stack is not zero then branch to instruction at pc + 3 + N, else proceed to next instruction at pc + 3. Branch targets must be aligned instructions. (e.g. Branching to the second byte of a 2 byte op will be rejected.) Starting at v4, the offset is treated as a signed 16 bit integer allowing for backward branches and looping. In prior version (v1 to v3), branch offsets are limited to forward branches only, 0-0x7fff.

At v2 it became allowed to branch to the end of the program exactly after the last instruction: bnz to byte N (with 0-indexing) was illegal for a TEAL program with N bytes before v2, and is legal after it. This change eliminates the need for a last instruction of no-op as a branch target at the end. (Branching beyond the end--in other words, to a byte larger than N--is still illegal and will cause the program to fail.)

bz¶

Syntax: bz TARGET where TARGET: branch offset
Bytecode: 0x41 {int16 (big-endian)}
Stack: ..., A: uint64 → ...
branch to TARGET if value A is zero
Availability: v2

See bnz for details on how branches work. bz inverts the behavior of bnz.

b¶

Syntax: b TARGET where TARGET: branch offset
Bytecode: 0x42 {int16 (big-endian)}
Stack: ... → ...
branch unconditionally to TARGET
Availability: v2

See bnz for details on how branches work. b always jumps to the offset.

return¶

Bytecode: 0x43
Stack: ..., A: uint64 → exits
use A as success value; end
Availability: v2

assert¶

Bytecode: 0x44
Stack: ..., A: uint64 → ...
immediately fail unless A is a non-zero number
Availability: v3

pop¶

Bytecode: 0x48
Stack: ..., A → ...
discard A

dup¶

Bytecode: 0x49
Stack: ..., A → ..., A, A
duplicate A

dup2¶

Bytecode: 0x4a
Stack: ..., A, B → ..., A, B, A, B
duplicate A and B
Availability: v2

dig¶

Syntax: dig N where N: depth
Bytecode: 0x4b {uint8}
Stack: ..., A, [N items] → ..., A, [N items], A
Nth value from the top of the stack. dig 0 is equivalent to dup
Availability: v3

swap¶

Bytecode: 0x4c
Stack: ..., A, B → ..., B, A
swaps A and B on stack
Availability: v3

select¶

Bytecode: 0x4d
Stack: ..., A, B, C: uint64 → ..., A or B
selects one of two values based on top-of-stack: B if C != 0, else A
Availability: v3

cover¶

Syntax: cover N where N: depth
Bytecode: 0x4e {uint8}
Stack: ..., [N items], A → ..., A, [N items]
remove top of stack, and place it deeper in the stack such that N elements are above it. Fails if stack depth <= N.
Availability: v5

uncover¶

Syntax: uncover N where N: depth
Bytecode: 0x4f {uint8}
Stack: ..., A, [N items] → ..., [N items], A
remove the value at depth N in the stack and shift above items down so the Nth deep value is on top of the stack. Fails if stack depth <= N.
Availability: v5

concat¶

Bytecode: 0x50
Stack: ..., A: []byte, B: []byte → ..., []byte
join A and B
Availability: v2

concat fails if the result would be greater than 4096 bytes.

substring¶

Syntax: substring S E where S: start position, E: end position
Bytecode: 0x51 {uint8}, {uint8}
Stack: ..., A: []byte → ..., []byte
A range of bytes from A starting at S up to but not including E. If E < S, or either is larger than the array length, the program fails
Availability: v2

substring3¶

Bytecode: 0x52
Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
A range of bytes from A starting at B up to but not including C. If C < B, or either is larger than the array length, the program fails
Availability: v2

getbit¶

Bytecode: 0x53
Stack: ..., A, B: uint64 → ..., uint64
Bth bit of (byte-array or integer) A. If B is greater than or equal to the bit length of the value (8*byte length), the program fails
Availability: v3

see explanation of bit ordering in setbit

setbit¶

Bytecode: 0x54
Stack: ..., A, B: uint64, C: uint64 → ..., any
Copy of (byte-array or integer) A, with the Bth bit set to (0 or 1) C. If B is greater than or equal to the bit length of the value (8*byte length), the program fails
Availability: v3

When A is a uint64, index 0 is the least significant bit. Setting bit 3 to 1 on the integer 0 yields 8, or 2^3. When A is a byte array, index 0 is the leftmost bit of the leftmost byte. Setting bits 0 through 11 to 1 in a 4-byte-array of 0s yields the byte array 0xfff00000. Setting bit 3 to 1 on the 1-byte-array 0x00 yields the byte array 0x10.

getbyte¶

Bytecode: 0x55
Stack: ..., A: []byte, B: uint64 → ..., uint64
Bth byte of A, as an integer. If B is greater than or equal to the array length, the program fails
Availability: v3

setbyte¶

Bytecode: 0x56
Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
Copy of A with the Bth byte set to small integer (between 0..255) C. If B is greater than or equal to the array length, the program fails
Availability: v3

extract¶

Syntax: extract S L where S: start position, L: length
Bytecode: 0x57 {uint8}, {uint8}
Stack: ..., A: []byte → ..., []byte
A range of bytes from A starting at S up to but not including S+L. If L is 0, then extract to the end of the string. If S or S+L is larger than the array length, the program fails
Availability: v5

extract3¶

Bytecode: 0x58
Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
A range of bytes from A starting at B up to but not including B+C. If B+C is larger than the array length, the program fails
extract3 can be called using extract with no immediates.
Availability: v5

extract_uint16¶

Bytecode: 0x59
Stack: ..., A: []byte, B: uint64 → ..., uint64
A uint16 formed from a range of big-endian bytes from A starting at B up to but not including B+2. If B+2 is larger than the array length, the program fails
Availability: v5

extract_uint32¶

Bytecode: 0x5a
Stack: ..., A: []byte, B: uint64 → ..., uint64
A uint32 formed from a range of big-endian bytes from A starting at B up to but not including B+4. If B+4 is larger than the array length, the program fails
Availability: v5

extract_uint64¶

Bytecode: 0x5b
Stack: ..., A: []byte, B: uint64 → ..., uint64
A uint64 formed from a range of big-endian bytes from A starting at B up to but not including B+8. If B+8 is larger than the array length, the program fails
Availability: v5

balance¶

Bytecode: 0x60
Stack: ..., A → ..., uint64
balance for account A, in microalgos. The balance is observed after the effects of previous transactions in the group, and after the fee for the current transaction is deducted. Changes caused by inner transactions are observable immediately following itxn_submit
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: value.

app_opted_in¶

Bytecode: 0x61
Stack: ..., A, B: uint64 → ..., bool
1 if account A is opted in to application B, else 0
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: 1 if opted in and 0 otherwise.

app_local_get¶

Bytecode: 0x62
Stack: ..., A, B: stateKey → ..., any
local state of the key B in the current application in account A
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), state key. Return: value. The value is zero (of type uint64) if the key does not exist.

app_local_get_ex¶

Bytecode: 0x63
Stack: ..., A, B: uint64, C: stateKey → ..., X: any, Y: bool
X is the local state of application B, key C in account A. Y is 1 if key existed, else 0
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset), state key. Return: did_exist flag (top of the stack, 1 if the application and key existed and 0 otherwise), value. The value is zero (of type uint64) if the key does not exist.

app_global_get¶

Bytecode: 0x64
Stack: ..., A: stateKey → ..., any
global state of the key A in the current application
Availability: v2
Mode: Application

params: state key. Return: value. The value is zero (of type uint64) if the key does not exist.

app_global_get_ex¶

Bytecode: 0x65
Stack: ..., A: uint64, B: stateKey → ..., X: any, Y: bool
X is the global state of application A, key B. Y is 1 if key existed, else 0
Availability: v2
Mode: Application

params: Txn.ForeignApps offset (or, since v4, an available application id), state key. Return: did_exist flag (top of the stack, 1 if the application and key existed and 0 otherwise), value. The value is zero (of type uint64) if the key does not exist.

app_local_put¶

Bytecode: 0x66
Stack: ..., A, B: stateKey, C → ...
write C to key B in account A's local state of the current application
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), state key, value.

app_global_put¶

Bytecode: 0x67
Stack: ..., A: stateKey, B → ...
write B to key A in the global state of the current application
Availability: v2
Mode: Application

app_local_del¶

Bytecode: 0x68
Stack: ..., A, B: stateKey → ...
delete key B from account A's local state of the current application
Availability: v2
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), state key.

Deleting a key which is already absent has no effect on the application local state. (In particular, it does not cause the program to fail.)

app_global_del¶

Bytecode: 0x69
Stack: ..., A: stateKey → ...
delete key A from the global state of the current application
Availability: v2
Mode: Application

params: state key.

Deleting a key which is already absent has no effect on the application global state. (In particular, it does not cause the program to fail.)

asset_holding_get¶

Syntax: asset_holding_get F where F: asset_holding
Bytecode: 0x70 {uint8}
Stack: ..., A, B: uint64 → ..., X: any, Y: bool
X is field F from account A's holding of asset B. Y is 1 if A is opted into B, else 0
Availability: v2
Mode: Application

asset_holding¶

Fields

Index	Name	Type	Notes
0	AssetBalance	uint64	Amount of the asset unit held by this account
1	AssetFrozen	bool	Is the asset frozen or not

params: Txn.Accounts offset (or, since v4, an available address), asset id (or, since v4, a Txn.ForeignAssets offset). Return: did_exist flag (1 if the asset existed and 0 otherwise), value.

asset_params_get¶

Syntax: asset_params_get F where F: asset_params
Bytecode: 0x71 {uint8}
Stack: ..., A: uint64 → ..., X: any, Y: bool
X is field F from asset A. Y is 1 if A exists, else 0
Availability: v2
Mode: Application

asset_params¶

Fields

Index	Name	Type	In	Notes
0	AssetTotal	uint64		Total number of units of this asset
1	AssetDecimals	uint64		See AssetParams.Decimals
2	AssetDefaultFrozen	bool		Frozen by default or not
3	AssetUnitName	[]byte		Asset unit name
4	AssetName	[]byte		Asset name
5	AssetURL	[]byte		URL with additional info about the asset
6	AssetMetadataHash	[32]byte		Arbitrary commitment
7	AssetManager	address		Manager address
8	AssetReserve	address		Reserve address
9	AssetFreeze	address		Freeze address
10	AssetClawback	address		Clawback address
11	AssetCreator	address	v5	Creator address

params: Txn.ForeignAssets offset (or, since v4, an available asset id. Return: did_exist flag (1 if the asset existed and 0 otherwise), value.

app_params_get¶

Syntax: app_params_get F where F: app_params
Bytecode: 0x72 {uint8}
Stack: ..., A: uint64 → ..., X: any, Y: bool
X is field F from app A. Y is 1 if A exists, else 0
Availability: v5
Mode: Application

app_params¶

Fields

Index	Name	Type	Notes
0	AppApprovalProgram	[]byte	Bytecode of Approval Program
1	AppClearStateProgram	[]byte	Bytecode of Clear State Program
2	AppGlobalNumUint	uint64	Number of uint64 values allowed in Global State
3	AppGlobalNumByteSlice	uint64	Number of byte array values allowed in Global State
4	AppLocalNumUint	uint64	Number of uint64 values allowed in Local State
5	AppLocalNumByteSlice	uint64	Number of byte array values allowed in Local State
6	AppExtraProgramPages	uint64	Number of Extra Program Pages of code space
7	AppCreator	address	Creator address
8	AppAddress	address	Address for which this application has authority

params: Txn.ForeignApps offset or an available app id. Return: did_exist flag (1 if the application existed and 0 otherwise), value.

acct_params_get¶

Syntax: acct_params_get F where F: acct_params
Bytecode: 0x73 {uint8}
Stack: ..., A → ..., X: any, Y: bool
X is field F from account A. Y is 1 if A owns positive algos, else 0
Availability: v6
Mode: Application

acct_params¶

Fields

Index	Name	Type	Notes
0	AcctBalance	uint64	Account balance in microalgos
1	AcctMinBalance	uint64	Minimum required balance for account, in microalgos
2	AcctAuthAddr	address	Address the account is rekeyed to.

min_balance¶

Bytecode: 0x78
Stack: ..., A → ..., uint64
minimum required balance for account A, in microalgos. Required balance is affected by ASA, App, and Box usage. When creating or opting into an app, the minimum balance grows before the app code runs, therefore the increase is visible there. When deleting or closing out, the minimum balance decreases after the app executes. Changes caused by inner transactions or box usage are observable immediately following the opcode effecting the change.
Availability: v3
Mode: Application

params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: value.

pushbytes¶

Syntax: pushbytes BYTES where BYTES: a byte constant
Bytecode: 0x80 {varuint length, bytes}
Stack: ... → ..., []byte
immediate BYTES
Availability: v3

pushbytes args are not added to the bytecblock during assembly processes

pushint¶

Syntax: pushint UINT where UINT: an int constant
Bytecode: 0x81 {varuint}
Stack: ... → ..., uint64
immediate UINT
Availability: v3

pushint args are not added to the intcblock during assembly processes

callsub¶

Syntax: callsub TARGET where TARGET: branch offset
Bytecode: 0x88 {int16 (big-endian)}
Stack: ... → ...
branch unconditionally to TARGET, saving the next instruction on the call stack
Availability: v4

The call stack is separate from the data stack. Only callsub, retsub, and proto manipulate it.

retsub¶

Bytecode: 0x89
Stack: ... → ...
pop the top instruction from the call stack and branch to it
Availability: v4

If the current frame was prepared by proto A R, retsub will remove the 'A' arguments from the stack, move the R return values down, and pop any stack locations above the relocated return values.

shl¶

Bytecode: 0x90
Stack: ..., A: uint64, B: uint64 → ..., uint64
A times 2^B, modulo 2^64
Availability: v4

shr¶

Bytecode: 0x91
Stack: ..., A: uint64, B: uint64 → ..., uint64
A divided by 2^B
Availability: v4

sqrt¶

Bytecode: 0x92
Stack: ..., A: uint64 → ..., uint64
The largest integer I such that I^2 <= A
Cost: 4
Availability: v4

bitlen¶

Bytecode: 0x93
Stack: ..., A → ..., uint64
The highest set bit in A. If A is a byte-array, it is interpreted as a big-endian unsigned integer. bitlen of 0 is 0, bitlen of 8 is 4
Availability: v4

bitlen interprets arrays as big-endian integers, unlike setbit/getbit

exp¶

Bytecode: 0x94
Stack: ..., A: uint64, B: uint64 → ..., uint64
A raised to the Bth power. Fail if A == B == 0 and on overflow
Availability: v4

expw¶

Bytecode: 0x95
Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
A raised to the Bth power as a 128-bit result in two uint64s. X is the high 64 bits, Y is the low. Fail if A == B == 0 or if the results exceeds 2^128-1
Cost: 10
Availability: v4

bsqrt¶

Bytecode: 0x96
Stack: ..., A: bigint → ..., bigint
The largest integer I such that I^2 <= A. A and I are interpreted as big-endian unsigned integers
Cost: 40
Availability: v6

divw¶

Bytecode: 0x97
Stack: ..., A: uint64, B: uint64, C: uint64 → ..., uint64
A,B / C. Fail if C == 0 or if result overflows.
Availability: v6

The notation A,B indicates that A and B are interpreted as a uint128 value, with A as the high uint64 and B the low.

b+¶

Bytecode: 0xa0
Stack: ..., A: bigint, B: bigint → ..., []byte
A plus B. A and B are interpreted as big-endian unsigned integers
Cost: 10
Availability: v4

b-¶

Bytecode: 0xa1
Stack: ..., A: bigint, B: bigint → ..., bigint
A minus B. A and B are interpreted as big-endian unsigned integers. Fail on underflow.
Cost: 10
Availability: v4

b/¶

Bytecode: 0xa2
Stack: ..., A: bigint, B: bigint → ..., bigint
A divided by B (truncated division). A and B are interpreted as big-endian unsigned integers. Fail if B is zero.
Cost: 20
Availability: v4

b*¶

Bytecode: 0xa3
Stack: ..., A: bigint, B: bigint → ..., []byte
A times B. A and B are interpreted as big-endian unsigned integers.
Cost: 20
Availability: v4

b<¶

Bytecode: 0xa4
Stack: ..., A: bigint, B: bigint → ..., bool
1 if A is less than B, else 0. A and B are interpreted as big-endian unsigned integers
Availability: v4

b>¶

Bytecode: 0xa5
Stack: ..., A: bigint, B: bigint → ..., bool
1 if A is greater than B, else 0. A and B are interpreted as big-endian unsigned integers
Availability: v4

b<=¶

Bytecode: 0xa6
Stack: ..., A: bigint, B: bigint → ..., bool
1 if A is less than or equal to B, else 0. A and B are interpreted as big-endian unsigned integers
Availability: v4

b>=¶

Bytecode: 0xa7
Stack: ..., A: bigint, B: bigint → ..., bool
1 if A is greater than or equal to B, else 0. A and B are interpreted as big-endian unsigned integers
Availability: v4

b==¶

Bytecode: 0xa8
Stack: ..., A: bigint, B: bigint → ..., bool
1 if A is equal to B, else 0. A and B are interpreted as big-endian unsigned integers
Availability: v4

b!=¶

Bytecode: 0xa9
Stack: ..., A: bigint, B: bigint → ..., bool
0 if A is equal to B, else 1. A and B are interpreted as big-endian unsigned integers
Availability: v4

b%¶

Bytecode: 0xaa
Stack: ..., A: bigint, B: bigint → ..., bigint
A modulo B. A and B are interpreted as big-endian unsigned integers. Fail if B is zero.
Cost: 20
Availability: v4

b|¶

Bytecode: 0xab
Stack: ..., A: []byte, B: []byte → ..., []byte
A bitwise-or B. A and B are zero-left extended to the greater of their lengths
Cost: 6
Availability: v4

b&¶

Bytecode: 0xac
Stack: ..., A: []byte, B: []byte → ..., []byte
A bitwise-and B. A and B are zero-left extended to the greater of their lengths
Cost: 6
Availability: v4

b^¶

Bytecode: 0xad
Stack: ..., A: []byte, B: []byte → ..., []byte
A bitwise-xor B. A and B are zero-left extended to the greater of their lengths
Cost: 6
Availability: v4

b~¶

Bytecode: 0xae
Stack: ..., A: []byte → ..., []byte
A with all bits inverted
Cost: 4
Availability: v4

bzero¶

Bytecode: 0xaf
Stack: ..., A: uint64 → ..., []byte
zero filled byte-array of length A
Availability: v4

log¶

Bytecode: 0xb0
Stack: ..., A: []byte → ...
write A to log state of the current application
Availability: v5
Mode: Application

log fails if called more than MaxLogCalls times in a program, or if the sum of logged bytes exceeds 1024 bytes.

itxn_begin¶

Bytecode: 0xb1
Stack: ... → ...
begin preparation of a new inner transaction in a new transaction group
Availability: v5
Mode: Application

itxn_begin initializes Sender to the application address; Fee to the minimum allowable, taking into account MinTxnFee and credit from overpaying in earlier transactions; FirstValid/LastValid to the values in the invoking transaction, and all other fields to zero or empty values.

itxn_field¶

Syntax: itxn_field F where F: txn
Bytecode: 0xb2 {uint8}
Stack: ..., A → ...
set field F of the current inner transaction to A
Availability: v5
Mode: Application

itxn_field fails if A is of the wrong type for F, including a byte array of the wrong size for use as an address when F is an address field. itxn_field also fails if A is an account, asset, or app that is not available, or an attempt is made extend an array field beyond the limit imposed by consensus parameters. (Addresses set into asset params of acfg transactions need not be available.)

itxn_submit¶

Bytecode: 0xb3
Stack: ... → ...
execute the current inner transaction group. Fail if executing this group would exceed the inner transaction limit, or if any transaction in the group fails.
Availability: v5
Mode: Application

itxn_submit resets the current transaction so that it can not be resubmitted. A new itxn_begin is required to prepare another inner transaction.

itxn¶

Syntax: itxn F where F: txn
Bytecode: 0xb4 {uint8}
Stack: ... → ..., any
field F of the last inner transaction
Availability: v5
Mode: Application

itxna¶

Syntax: itxna F I where F: txna, I: a transaction field array index
Bytecode: 0xb5 {uint8}, {uint8}
Stack: ... → ..., any
Ith value of the array field F of the last inner transaction
Availability: v5
Mode: Application

itxn_next¶

Bytecode: 0xb6
Stack: ... → ...
begin preparation of a new inner transaction in the same transaction group
Availability: v6
Mode: Application

itxn_next initializes the transaction exactly as itxn_begin does

gitxn¶

Syntax: gitxn T F where T: transaction group index, F: txn
Bytecode: 0xb7 {uint8}, {uint8}
Stack: ... → ..., any
field F of the Tth transaction in the last inner group submitted
Availability: v6
Mode: Application

gitxna¶

Syntax: gitxna T F I where T: transaction group index, F: txna, I: transaction field array index
Bytecode: 0xb8 {uint8}, {uint8}, {uint8}
Stack: ... → ..., any
Ith value of the array field F from the Tth transaction in the last inner group submitted
Availability: v6
Mode: Application

txnas¶

Syntax: txnas F where F: txna
Bytecode: 0xc0 {uint8}
Stack: ..., A: uint64 → ..., any
Ath value of the array field F of the current transaction
Availability: v5

gtxnas¶

Syntax: gtxnas T F where T: transaction group index, F: txna
Bytecode: 0xc1 {uint8}, {uint8}
Stack: ..., A: uint64 → ..., any
Ath value of the array field F from the Tth transaction in the current group
Availability: v5

gtxnsas¶

Syntax: gtxnsas F where F: txna
Bytecode: 0xc2 {uint8}
Stack: ..., A: uint64, B: uint64 → ..., any
Bth value of the array field F from the Ath transaction in the current group
Availability: v5

args¶

Bytecode: 0xc3
Stack: ..., A: uint64 → ..., []byte
Ath LogicSig argument
Availability: v5
Mode: Signature

gloadss¶

Bytecode: 0xc4
Stack: ..., A: uint64, B: uint64 → ..., any
Bth scratch space value of the Ath transaction in the current group
Availability: v6
Mode: Application

itxnas¶

Syntax: itxnas F where F: txna
Bytecode: 0xc5 {uint8}
Stack: ..., A: uint64 → ..., any
Ath value of the array field F of the last inner transaction
Availability: v6
Mode: Application

gitxnas¶

Syntax: gitxnas T F where T: transaction group index, F: txna
Bytecode: 0xc6 {uint8}, {uint8}
Stack: ..., A: uint64 → ..., any
Ath value of the array field F from the Tth transaction in the last inner group submitted
Availability: v6
Mode: Application

Create Publication

v6 Opcodes

err¶

sha256¶

keccak256¶

sha512_256¶

ed25519verify¶

ecdsa_verify¶

ECDSA¶

ecdsa_pk_decompress¶

ecdsa_pk_recover¶

+¶

-¶

/¶

*¶

<¶

>¶

<=¶

>=¶

&&¶

||¶

==¶

!=¶

!¶

len¶

itob¶

btoi¶

%¶

|¶

&¶

^¶

~¶

mulw¶

addw¶

divmodw¶

intcblock¶

intc¶

intc_0¶

intc_1¶

intc_2¶

intc_3¶

bytecblock¶

bytec¶

bytec_0¶

bytec_1¶

bytec_2¶

bytec_3¶

arg¶

arg_0¶

arg_1¶

arg_2¶

arg_3¶

txn¶

txn¶

global¶

global¶

gtxn¶

load¶

store¶

txna¶

txna¶

gtxna¶

gtxns¶

gtxnsa¶

gload¶

gloads¶

gaid¶

gaids¶

loads¶

stores¶

bnz¶

bz¶

b¶

return¶

assert¶

pop¶

dup¶

dup2¶

dig¶

swap¶